10" Quick-Change Multi-Accessory Disc

Fits any TG-10 Turbo Grinder with a Rigid Head. Makes changing accessories easy, even while standing. Simply fasten the new EDCO Quick-Change Multi-Disc to the TG-10 Turbo Grinder then slide on the accessories. When one job is complete, quickly slide the accessory off and retool for the next task.

Change accessories in less than 30 seconds, accessories slide-on and off magnetically, no bolts.

One simple disc that’s multi-functional. Simply attach the disc once and you’re ready to go!

Part# 86389

7" Quick-Change Multi-Accessory Disc

Makes changing accessories easy, even while standing. Simply fasten the new EDCO Quick-Change Multi-Disc to the TMC-7 Turbo Grinder then slide on the accessories. When one job is complete, quickly slide the accessory off and retool for the next task.

Change accessories in less than 30 seconds, accessories slide-on and off magnetically, no bolts.

One simple disc that’s multi-functional. Simply attach the disc once and you’re ready to go!

Part# 72034

Quick-Change DOUBLE Diamond Dots - General Purpose Grind

Ideal for:
- Removing General Purpose Epoxy, Mastics, Thinsets, Water-Proofing Coatings and more.
- Remove concrete and create a level surface without gouging.

Magnetic backing for use on both 7" and 10" Quick-Change Multi-Accessory Discs.

Quick-Change SINGLE Diamond Dots - Aggressive Grind

Ideal for:
- Aggressively Grinding Concrete and Removing Thick Epoxies, Weather-Proofing Membrane and Other Coverings.
- Remove concrete and create a level surface without gouging.

Magnetic backing for use on both 7" and 10" Quick-Change Multi-Accessory Discs.

Quick-Change PCD Accessory - Extremely Aggressive Removal

Ideal for:
- Digging through Industrial Strength Coverings, Water-Proofing Membrane, Thick Epoxies and much more.
- Leaves a textured concrete surface.

Magnetic backing for use on both 7" and 10" Quick-Change Multi-Accessory Discs.

Part# QC-PCD1

7" Diamond Cup Wheels

EDCO's 17 segment, dry cut, 7" Diamond Cup Wheel comes with the purchase of an EDCO 7" Grinder (model TMC-7).

Ideal for:

• Wet or Dry Grinding
• Grinding hard surfaces
• Feather edging sidewalks, curbs, and gutters
• Grinding away heaved, cracked areas of gutters and curbs to allow proper gutter drainage

40-50 Grit - Part# 72030
150 Grit - Part# 72031

7" Scarifier Assembly

EDCO's 7" Scarifier Assembly is an optional accessory for the 7" Turbo Grinder.

7" Scarifier Assembly for use on Model TMC-7 with Rigid Head Only (Not to be used with the Flex Head).

The life expectancy of the steel or carbide cutters depends on the material being removed.

Ideal for:

• Removing coatings
• Spot removal of slab markings and trip hazards

Part# 72030

The life expectancy of a disc depends on the material being removed. The discs can be used wet or dry.

Ideal for:

• Fast grinding of rough, uneven slab surfaces
• Grinding 1/8"-1/4" and leaving a smooth finish to the surface

Higher Grit Diamond Discs Are Available For Fine and Very Fine Surface Finishes.