EDCO
Floor Grinding & Surface Preparation Removal & Demolition Concrete Sawing & Drilling Masonry, Hardscape & Tile Saws
EDCO

Application Guide

GRIND

Application #1 Machine & Accessory Video
Remove Paints, sealers, mastics, high spots, rain marks, trowel marks, rough surfaces and uneven joints. Floor Grinder w/Dyma-Serts Floor Grinders Accessory Applications
Application #2 Machine & Accessory Video
Lightly grind rough or uneven spots Floor Grinders w/Stones Floor Grinders Accessory Applications
Application #3 Machine & Accessory Video
Grind expansion joints, high spots, joint curls, bridge decks & rough concrete surfaces. Rigid Head 10"Turbo Grinder w/10" Diamond Disc 10" Turbo Grinder in action
Application #4 Machine & Accessory Video
Prepare flat floor surfaces for coating. Concrete surface profiling. Remove thin-mil. coatings. Flex Head 10"Turbo Grinder w/10" Diamond Disc 10" Turbo Grinder in action
Application #5 Machine & Accessory Video
Grind curb gutters, expansion joints, high spots. Prep surface for coating. Remove coatings in small areas. Rigid Head 7"Turbo Grinder w/7" Cup Wheel 7" Turbo Grinder in action
Application #6 Machine & Accessory Video
Grind tightly against any vertical surface. Remove coatings, paints, markings & lines. Flex Head 7"Turbo Grinder w/7" Cup Wheel 7" Turbo Grinder in action
PRODUCTON CHART
Single-Disc Floor Grinder (Model SEC) Remove 200-250 sq. ft. per hour at 1/32" with EDCO Dyma-Serts
Dual-Disc Floor Grinder (Model 2EC/2GC) Remove 400-500 sq. ft. per hour at 1/32" with EDCO Dyma-Serts
Four-Disc Grinder (Model 4GC/4EC) Remove 700-900 sq. ft. per hour at 1/32" with EDCO Dyma-Serts
10" Turbo Grinder (Model TG-10) Remove 400-500 sq. ft. per hour at 1/16" with and EDCO Diamond Disc
7" Turbo Edge Grinder (Model TMC-7) Remove 400-500 linela ft. per hour at 1/16" with and EDCO Diamond Cup Wheel
8" Walk-Behind Scarifier (Model CPM-8) Remove 350-500 sq. ft. per hour at a depth per pass of 1/8"
10" Walk-Behind Scarifier (Model CPM-10) Remove 500-700 sq. ft. per hour at a depth per pass of 1/8"
10" Self-Propelled Scarifier (Model CPU-10) Remove 600-800 sq. ft. per hour at a depth per pass of 1/8"
12" Self Propelled Scarifier (Model CPU-12) Remove 1,250-,1500 sq. ft. per hour at a depth per pass of 1/8"
Traffic Line Remover (Model TLR-7) Remove 700-1,000 lineal fr. per hour with EDCO TLR Carbide Cutter
3-Head Scabbler (Model CD-3) Remove up to 200 sq. ft. per hour at a depth per pass of 3/16"
5-Head Scabbler (Model CD-5) Remove up to 250 sq. ft. per hour at a depth per pass of 1/4"
Electric Floor Stripper (Model TS-8) Remove 200 sq. ft. per hour of vinyl or similar soft material
Air-Powered Chisel Scalers Remove 200-300 sq. ft. per hour
Home | Customers | Products | Company Information | Contact Us | Privacy Policy | Site Map | Links
© Copyright 2010. EDCO, Inc.
Powered by Maryland Website Designer WebsiteGrowers.com, Inc.
 
Home Customers Products Company Information Contact Us