Application Guide

MARKING REMOVAL

Application #1	Machine & Accessory	Video
Remove paint, tape, thermoplastics and epoxy traffic markings quickly. Remove paints with minimal surface damage.	Traffic Line Remover w/Carbide Cutters (Controlled depth line removal 4 to 8 inch width)	TLR-7 in action
Application #2	Machine & Accessory	Video
Remove traffic markings	CPM-4 or CPM-8 w/Carbide or Steel Cutter Drum	EDCO Scarifiers
Application #3	Machine & Accessory	Video
Remove paints, markings & lines.	Flex Head 7" Turbo/Edge Grinder w/7" Cup Wheel or Scarifier Assembly	7" Turbo Grinder in action

PRODUCTON CHART

Single-Disc Floor Grinder (Model SEC)	Remove 200-250 sq. ft. per hour at 1/32" with EDCO Dyma-Serts
Dual-Disc Floor Grinder (Model 2EC/2GC)	Remove 400-500 sq. ft. per hour at 1/32" with EDCO Dyma-Serts
Four-Disc Grinder (Model 4GC/4EC)	Remove 700-900 sq. ft. per hour at 1/32" with EDCO Dyma-Serts
10" Turbo Grinder (Model TG-10)	Remove 400-500 sq. ft. per hour at 1/16" with and EDCO Diamond Disc
7" Turbo Edge Grinder (Model TMC-7)	Remove 400-500 linela ft. per hour at 1/16" with and EDCO Diamond Cup Wheel
8" Walk-Behind Scarifier (Model CPM-8)	Remove 350-500 sq. ft. per hour at a depth per pass of 1/8"
10" Walk-Behind Scarifier (Model CPM-10)	Remove 500-700 sq. ft. per hour at a depth per pass of 1/8"
10" Self-Propelled Scarifier (Model CPU-10)	Remove 600-800 sq. ft. per hour at a depth per pass of 1/8"
12" Self Propelled Scarifier (Model CPU-12)	Remove 1,250-,1500 sq. ft. per hour at a depth per pass of 1/8"
Traffic Line Remover (Model TLR-7)	Remove 700-1,000 lineal fr. per hour with EDCO TLR Carbide Cutter
3-Head Scabbler (Model CD-3)	Remove up to 200 sq. ft. per hour at a depth per pass of 3/16"
5-Head Scabbler (Model CD-5)	Remove up to 250 sq. ft. per hour at a depth per pass of 1/4"
Electric Floor Stripper (Model TS-8)	Remove 200 sq. ft. per hour of vinyl or similar soft material
Air-Powered Chisel Scalers	Remove 200-300 sq. ft. per hour