![[ ]](http://www.edcoinc.com/images/spacer.gif) |
Contact EDCO
info@edcoinc.com
1-800-638-3326
100 Thomas Johnson Drive
Frederick, MD 21702 |
![[ ]](http://www.edcoinc.com/images/spacer.gif) |
Pictured to the left is EDCO's heavy-duty gasoline powered SS-65 street saw. These saw operators are cutting through asphalt with the SS-65 to put in a storm drain.
This picture was taken in Walkersville, Maryland. These two contractors work for Stambaugh's Inc. which is based out of Union Bridge, Maryland. |
In this picture the operators are using the SS-65 to saw straight through the concrete curb.
To contact Stambaugh's Inc.,
call 1-410-775-2363.
More SS-65 Information
|
This picture of EDCO's CPM-8 Scarifier was taken in the city of Breckenridge, Colorado.
The CPM-8 is being used to remove old traffic lines in the middle of a busy road. As you can see, the CPM-8 with an 8" working width and its 1/8" working depth per pass easily takes up the double yellow lines without digging very deep into the asphalt surface.
The CPM-8 is an ideal product for any traffic or parking line removal job.
More Scarifier Information
|
This action shot of the model CD-3, Air-Powered 3-Headed Scabbler was taken at EDCO. In the background of this shot is EDCO's Vacuum model Vac-160.
The operator is using the CD-3 to knock out a trip hazard by making a ramp. This trip hazard is about 2-3 inches tall. The CD-3 quickly leveled off the edge and left behind a textured surface.
More CD-3 Information
|
This picture was taken on Rt. 144 near New Market, Maryland. Shown in operation is the EDCO Self-Propelled SS-65 Diesel Saw.
For this job, the saw operator needed to cut through the asphalt at a 7" depth for approximately 150 yards. The experienced operator was able to complete the cut in one pass with ease.
More SS-65D Information
|
![[]](http://www.edcoinc.com/library/jpg/328_1042839611.jpg) |
Rescued!
EDCO Surface Preparation Equipment was the key to rescuing a botched 85-Yard pour.
Read this recent story featured in Coatings Pro Magazine to find out how EDCO saved the day... |
Pictured to the left are EDCO engineering technician Ray Coblentz and Archway Systems President Ray Wethington. EDCO customized multiple MS-20 Saws for Archway's high production specialty brickcutting operation. Ray is installing a new table on this saw. |
Archway System / Brick Specialty Warehouse
Contact: Ray Wethington
Phone: 1.800.660.2543 -or- 301.499.2222
Fax: 301.808.0352
Address: 1408 Ritchie Marlboro Rd. D-3
Capital Heights, Maryland 20743 |
![[ ]](http://www.edcoinc.com/images/spacer.gif) |