EDCO 8" Scari-Lite Mini-Planer

8" Scari-Lite Mini-Planer

4" Walk Behind Scarifier \| 8" Scari-Lite Mini-Planer \| 8" Walk Behind Scarifier \| 10" Walk Behind Scarifier

Features

8" working width will scarify approximately 175-250 sq. ft. per hour at a Depth of 1/32" Per Pass
8-Inch, 6-Shaft drum accepts carbide and steel cutters
Etch the surface for new coatings
Available in 1.5HP Electric or 5.5HP Gasoline
Comes standard with universal vacuum port hookup
Uses same carbide & steel cutters as the CPM-8 Model scarifier

Ideal For:

Etching away paint, urethane, thin-set and coatings

Model	Part #	Power	Horse Power	Phase	Amps	* RPM's	Belts	Length	Width	Height	Weight
CPL-8-1.5L	69300	Electric	1.5HP, 110V	Single	17.2	1100	AX-27 Belts	31"	19"	42.5"	145 lbs.
CPL-8-5.5H	69500	Gasoline	**5.5HP	NA	NA	2200	AP-29 Belts	31"	19"	42.5"	150 lbs.

*RPM's are based on the machine's accessory speed.
** As rated by the engine manufacturer. The power rating of the engine indicated on this site is the net power output tested on a production engine for the engine model and measured in accordance with SAE j1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.

Product Manuals & Literature

Cutter Drum Assembly Instructions

CPL-8 Carbide Cutter Drum Set-Up

Only the most recently updated product information is available on this website. Call 1-800-638-3326 with the Serial# and Model# for manuals
and parts list of older product models.

Additional Videos

EDCO Scarifiers

Accessories

Carbide & Steel Cutters