EDCO 4" Walk Behind Scarifier

4" Walk Behind Scarifier

4" Walk Behind Scarifier \| 8" Scari-Lite Mini-Planer \| 8" Walk Behind Scarifier \| 10" Walk Behind Scarifier

Features

4" working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/16"
Grinds within 3/4" of vertical surfaces
Removes traffic lines at 800-1,000 lineal ft. per hour
Lightweight for easy transport and maneuverability
Economical
Vacuum port equipped

Ideal for:

Removing traffic lines from warehouse floors
Working around stationary equipment
Small, narrow areas or edge
Working along edges of truck pits

Model	Part #	Power	Horse Power	Phase	Amps	* RPM's	Belts	Length	Width	Height	Weight
CPM-4-1.5B	70500	Electric	1.5 HP 115/230 V	Single	19/9.5	1725	HTD-Belts	44.5"	18"	35"	174 lbs.
CPM-4-5.5H	70400	Gasoline	**5.5 HP	NA	NA	2084	HTD-Belts	44.5"	18"	35"	174 lbs.
CPM-4-5G	C76700	Air	5 HP	NA	NA	1450	HTD-Belts	44.5"	18"	35"	174 lbs.

*RPM's are based on the machine's accessory speed.
** As rated by the engine manufacturer. The power rating of the engine indicated on this site is the net power output tested on a production engine for the engine model and measured in accordance with SAE j1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables.

Product Manuals & Literature

Cutter Drum Assembly Instructions

Only the most recently updated product information is available on this website. Call 1-800-638-3326 with the Serial# and Model# for manuals
and parts list of older product models.

Accessories

Carbide & Steel Cutters