|
|
| Features |
- Three-position articulating frame adjustment for left angle, right angle or straight position grinding
- Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
- Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
- Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
- Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
- Comes standard with Flex Head Assembly, but is also available with optional Rigid Head Assembly for doing gutter work
- New & improved tapered roller bearings provide less maintenance and longer life
Ideal for:
- Edge grinding along vertical surfaces
- Removing coatings, build-ups, markings, overlays or paints
RIGID HEAD ASSEMBLY IS IDEAL FOR:
- Grinding uneven expansion joints, high spots, joint curls and bridge decks
- Removing coatings
- Grinding rough concrete surfaces
FLEX HEAD ASSEMBLY IS IDEAL FOR:
- Preparing a smooth, flat floor to receive a new coating
- Removing coatings
- Grinding rough concrete surfaces
- Grinding surfaces 4 times faster than a traditional floor grinder
|
|
|
| Model |
Part # |
Power |
Horse Power |
Phase |
Amps |
* RPM's |
Belts |
Length |
Width |
Height |
Weight |
| TMC-7,5.5H |
57100 |
Gasoline |
**5.5 HP |
NA |
NA |
3150 |
Cgd. "V" Belts |
40" |
24" |
38.5" |
120 lbs. |
| TMC-7, 2L |
57200 |
Electric |
2 HP 115/230 V |
Single |
18.4/9.2 |
1740 |
Cgd. "V" Belts |
40" |
24" |
38.5" |
130 lbs. |
*RPM's are based on the machine's accessory speed.
** As rated by the engine manufacturer. The power rating of the engine indicated on this site is the net power output tested on a production engine for the engine model and measured in accordance with SAE j1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. |
| Product Manuals & Literature |
|
Only the most recently updated product information is available on this website.
Call 1-800-638-3326 with the Serial# and Model# for manuals
and parts list of older product models. |
| Additional Videos |
|
|
| Accessories |
|
|
|
|
|
|
|
|
