Multi-Tooling Discs W/Carbide Pockets
NEW Multi-Tooling Discs with Carbide Pockets
Make changing tooling easy with the new EDCO Magna-Trap Multi-Tooling Disc.
Make changing tooling easy with the new EDCO Magna-Trap Multi-Tooling Disc.
NOW you can bolt our 8-sided tungsten carbides directly onto the disc for stripping applications.
No longer do you require the Magna-Blade holder! Save money by eliminating the holder. You can choose...use the Magna-Blade holder or not. The new 8-sided tungsten carbides are numbered for easy rotation. Each carbide edge can last up to 2 hours providing upwards of 16 hours of usable STRIPPING life.
Dyma-Dots, Dyma-Segs, Dyma-PCD's, Dyma-Arrows, Dyma-Crush & Magna-Spikes can be changed in less than 30 seconds. Tooling slides-on and off while being held in place magnetically.
One simple disc that’s multi-functional. Available on all EDCO low rpm single and dual head floor grinders as well as the high-speed Turbo Grinder series.
One simple disc that’s multi-functional. Available on all EDCO low rpm single and dual head floor grinders as well as the high-speed Turbo Grinder series.
- 7″ Disc for use on our 7″ Turbo Grinder
- 10″ Universal Disc for use on Single & Dual Low-Speed Grinders and 10″ Turbo Grinder (TG-10)
- Classic disc retrofit available for classic grinders
Carbides NOT Included. Not available for 9″ Turbo-Lite Grinder (TL-9)
10" Universal Multi-Tooling Disc w/carbide pockets
For use on: SEC, 2EC-NG, 2GC-NG, TG10
| Name | Part # | Price (USD) | |
|---|---|---|---|
|
10" Universal Multi-Tooling Disc w/carbide pockets | 100054 | $313.5 |
10" Disc Assembly with Carrier Ring & Carbide Pockets
For use on: SEC, 2EC-NG, 2GC-NG, TG10
| Name | Part # | Price (USD) | |
|---|---|---|---|
|
10" Disc Assembly with Carrier Ring & Carbide Pockets | 100053 | $439.11 |
7” Multi-Tooling Disc with Carbide Pockets
For use on: EDCO TMC-7, 7″ Turbo Grinder ONLY
| Name | Part # | Price (USD) | |
|---|---|---|---|
|
7" Multi-Tooling Disc w/Carbide Pockets | 100294 | $266.77 |
7″ Magna-Trap Disc w/Hub and Carbide Pockets
For use on: EDCO TMC-7, 7″ Turbo Grinder ONLY
| Name | Part # | Price (USD) | |
|---|---|---|---|
|
7″ Magna-Trap Disc w/Hub and Carbide Pockets | 100292 | $271.51 |
Magna-Trap Classic Disc Retrofit
- Simple installation on any EDCO Classic Grinder
- Accepts Magna-Trap tooling only (low profile)
- Will not void manufacturers warranty!!
- Eliminates the wooden wedge
For use on: Classic Dual-Disc Floor Grinder, Classic Single-Disc Floor Grinder, Classic Four-Disc Floor Grinders
| Name | Part # | Price (USD) | |
|---|---|---|---|
|
MT Retrofit Grinding Disc Assy W/ Carbide Pockets | 101201 | $489.24 |