Magna-Trap® Speciality Tooling

Single Dyma-Dots

Ideal For:
  • Aggressively Grinding Concrete and Removing Thick Epoxies, Weather-Proofing Membrane and Other Coverings.
  • Remove concrete and create a level surface without gouging.
  • Concrete Surface Profile (CSP) Rating: 2
  • Tooling Classification: Omni-Directional

*Note: Choose appropriate tooling
Hard Concrete (Red) = Softest bond. For use on concrete that contains low amounts of abrasive aggregate.
Medium Concrete (Grey) = Medium bond. General purpose concrete.
Soft Concrete (Yellow) = Hardest bond. For use on Abrasive Concrete (recommended bond for Coastal Areas/Green Concrete).

For use on:
  • Magna-Trap® Floor Grinders,  Single or Dual-Disc Models
  • Magna-Trap® Turbo Grinders, 7”, 9”, 10” Models
  • Classic-Style Grinders retrofitted with Magna-Trap® Multi-Tooling Disc
Name Part # Price (USD)
Magna-Trap® Single Dyma-Dots Soft QC1B-SC-0030 $96.39
Magna-Trap® Single Dyma-Dots Medium QC1B-MC-0030 $96.39
Magna-Trap® Single Dyma-Dots Hard QC1B-HC-0030 $96.39

Dyma-PCD

Ideal For:
  • Digging through Industrial Strength Coverings, Water-Proofing Membrane, Thick Epoxies and much more
  • Leaves a textured concrete surface
  • Concrete Surface Profile (CSP) Rating: Varies depending on application
  • Tooling Classification: Directional
    • Single Disc Grinders (SEC-NG, TL-9, TG-10 & TMC-7) require Left-Hand tooling only.
    • Dual Disc Grinders (2EC-NG, 2GC-NG, 2D-HD) require BOTH Left and Right Hand tooling.

For use on:
  • Magna-Trap®Floor Grinders,  Single or Dual-Disc Models
  • Magna-Trap® Turbo Grinders, 7”, 9”, 10” Models
  • Classic-Style Grinders retrofitted with Magna-Trap®Multi-Tooling Disc
Name Part # Price (USD)
Magna-Trap® Dyma-PCD (Left Hand) QC-PCD1-L $209.95
Magna-Trap® Dyma-PCD (Right Hand) QC-PCD1 $209.95

Dyma-Serts

Dyma Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings.

Dyma-Serts grind 5 times faster than grinding stones and last longer – up to 30,000 square feet (2,800 sq. m.) of grinding action on standard 3,500 PSI concrete. Dyma-Serts can be used for wet or dry grinding.

Ideal for:
  • Smoothing rough surfaces or trowel marks
  • Grinding terrazzo
  • Repairing surface damage to concrete slabs
  • Removing urethane or epoxy thincoats
  • Grinding sharp aggregates such as flint and granite
  • Removing surface imperfections from epoxy mortars
  • Leveling high spots
  • Removing thin mastics and thin-set

For use on:
  • Magna-Trap™ Floor Grinders,  Single or Dual-Disc Models
  • Classic Floor Grinders Single, Dual-Disc and Four-Disc Models
Name Part # Price (USD)
Dyma-Serts 1X - General Purpose 19110 $133.88
Dyma-Serts 2X - Medium Matrix 19130 $133.88
Dyma-Serts 3X - Hard Matrix 19180 $133.88
Magna-Trap™ Grinder Dyma-Sert Holding Case 19360 $37.49
Classic Style Grinder Dyma-Sert Holding Case 19120 $20.3

Strip-Serts

Strip-Serts are carbide tipped blocks designed to clean floors without grinding into the concrete.

Strip-Serts have a replaceable, multi-sided tungsten carbide edge that can be rotated for maximum use.

Ideal For:
  • Removing mastics, paints, resins, tar, fiberglass, ice and industrial buildups
Strip-Serts are designed to strip away coatings not to grind concrete. Grinding concrete with Strip Serts will dull the sharp edges quickly causing the grinding action to stop.

For use on:
  • Magna-Trap™ Floor Grinders,  Single or Dual-Disc Models
  • Classic Floor Grinders Single, Dual-Disc and Four-Disc Models
Name Part # Price (USD)
Magna-Trap Strip-Sert Complete Assembly (Left Hand) 12420 $211.83
Magna-Trap Strip-Sert Complete Assembly (Right Hand) 12424 $211.83

Dyma-Arrow

Ideal For:
  • Hard glue removal
  • Coatings removal
  • Fast concrete grinding
  • Creates smooth surfaces
  • Concrete Surface Profile (CSP) Rating: 2
  • Tooling Classification: Directional
    • Single Disc Grinders (SEC-NG, TL-9, TG-10 & TMC-7) require Left-Hand tooling only.
    • Dual Disc Grinders (2EC-NG, 2GC-NG, 2D-HD) require BOTH Left and Right Hand tooling.

For use on:
  • Magna-Trap® Floor Grinders,  Single or Dual-Disc Models
  • Magna-Trap® Turbo Grinders, 7”, 9”, 10” Models
  • Classic-Style Grinders retrofitted with Magna-Trap® Multi-Tooling Disc
Name Part # Price (USD)
Magna-Trap® Dyma-Arrows Medium (Left Hand) QCAR-MC-0030 $135
Magna-Trap® Dyma-Arrows Medium (Right Hand) QCAR-MC-0030-R $135
Magna-Trap® Dyma-Arrows Soft (Left Hand) QCAR-SC-0030-L $135
Magna-Trap® Dyma-Arrows Soft (Right Hand) QCAR-SC-0030-R $135

Dyma-Crush

Ideal For:
  • Hard coating and glue removal.
  • Leaves a relative light texture, similar to a shot blast finish.
  • Concrete Surface Profile (CSP) Rating: 3
  • Tooling Classification: Omni-Directional

For use on:
  • Magna-Trap™ Floor Grinders,  Single or Dual-Disc Models
  • Magna-Trap™ Turbo Grinders, 7”, 9”, 10” Models
  • Classic-Style Grinders retrofitted with Magna-Trap™ Multi-Tooling Disc
Name Part # Price (USD)
Dyma-Crush QC2C-PCD $403.44

Economy Grinding Tool

Ideal For:
  • Smoothing Concrete
  • Thin-Hard Coating Removal
  • Common Surface Preparation Tasks on General-Purpose Concrete
  • Leaves clean smooth finish.  Use this less sq.ft. tool when application cannot be qualified
  • Concrete Surface Profile (CSP) Rating: 1-2
  • Tooling Classification: Omni-Directional

For use on:
  • Magna-Trap® Floor Grinders,  Single or Dual-Disc Models
  • Magna-Trap® Turbo Grinders, 7”, 9”, 10” Models
  • Classic-Style Grinders retrofitted with Magna-Trap® Multi-Tooling Disc
Name Part # Price (USD)
Economy Grinding Tool Medium M501MC $69.62
Economy Grinding Tool Soft M501SC $76.04

Economy Removal Tool

Ideal For:
  • Industrial strength coatings removal
  • Thick-hard coating removal
  • Texturing concrete surfaces
  • Concrete Surface Profile (CSP) Rating: Varies depending on application
  • Tooling Classification: Directional
    • Single Disc Grinders (SEC-NG, TL-9, TG-10 & TMC-7) require Left-Hand tooling only.
    • Dual Disc Grinders (2EC-NG, 2GC-NG, 2D-HD) require BOTH Left and Right-Hand tooling.

For use on:
  • Magna-Trap® Floor Grinders,  Single or Dual-Disc Models
  • Magna-Trap® Turbo Grinders, 7”, 9”, 10” Models
  • Classic-Style Grinders retrofitted with Magna-Trap® Multi-Tooling Disc
Name Part # Price (USD)
Economy Removal Tool (Left Hand) M401PL $105
Economy Removal Tool (Right Hand) M401PR $105