Magna-Trap® Core 4 Tooling
STRIP • GRIND • REMOVE
Our core 4 Magna-Trap® tools are specifically designed to solve most surface preparation tasks. For more specialty applications check out our specialty tooling page.
Our core 4 Magna-Trap® tools are specifically designed to solve most surface preparation tasks. For more specialty applications check out our specialty tooling page.
Magna-Blades - STRIP
Magna-Blades are 8 sided carbide tipped blocks designed to clean floors without grinding into the concrete. They have a replaceable, multi-sided tungsten carbide edge that can be rotated for maximum use.
Ideal For:
Ideal For:
- Flaking paint
- Glue & adhesives
- Soft thinset
- Industrial buildups
- Foam rubber carpet backing
- Concrete Surface Profile (CSP) Rating: 0-1
- Tooling Classification: Directional
- Single Disc Grinders (SEC-NG, TG-10 & TMC-7) require Left-Hand tooling only.
- Dual Disc Grinders (2EC-NG, 2GC-NG, 2D-HD) require BOTH Left and Right Hand tooling.
For use on:
- Magna-Trap® Floor Grinders, Single or Dual-Disc Models
- Magna-Trap® Turbo Grinders, 7”, 10” Models
- Classic-Style Grinders retrofitted with Magna-Trap® Multi-Tooling Disc
| Name | Part # | Price (USD) | |
|---|---|---|---|
|
Magna-Trap® Magna-Blades (Left Hand)(Pack of 3) | 12501LC | $350 |
|
Magna-Trap® Magna-Blades (Right Hand)(Pack of 3) | 12501RC | $350 |
Double Dyma-Dots - GRIND
Ideal for:
- Removing General Purpose Epoxy, Mastics, Thinsets, Water-Proofing Coatings and more.
- Remove concrete and create a level surface without gouging.
- Concrete Surface Profile (CSP) Rating: 1-2
- Tooling Classification: Omni-Directional
*Note: Choose appropriate tooling
Hard Concrete (Red) = Softest bond. For use on concrete that contains low amounts of abrasive aggregate.
Medium Concrete (Grey) = Medium bond. General purpose concrete.
Soft Concrete (Yellow) = Hardest bond. For use on Abrasive Concrete (recommended bond for Coastal Areas/Green Concrete).
For use on:
- Magna-Trap® Floor Grinders, Single or Dual-Disc Models
- Magna-Trap® Turbo Grinders, 7”, 9”, 10” Models
- Classic-Style Grinders retrofitted with Magna-Trap® Multi-Tooling Disc
| Name | Part # | Price (USD) | |
|---|---|---|---|
|
Magna-Trap® Double Dyma-Dots Soft (Yellow, 30 Grit, Pack of 3) | QC2B-SC-0030 | $119.85 |
|
Magna-Trap® Double Dyma-Dots Medium (Grey, 30 Grit, Pack of 3) | QC2B-MC-0030 | $119.85 |
|
Magna-Trap® Double Dyma-Dots Hard (Red, 30 Grit, Pack of 3) | QC2B-HC-0030 | $119.85 |
Dyma-Segs - GRIND
Ideal For:
- General coating, abrasive coatings and concrete removal
- Creating clean and smooth concrete surfaces with a medium amount of scratches on the concrete.
- Concrete Surface Profile (CSP) Rating: 2
- Tooling Classification: Omni-Directional
For use on:
- Magna-Trap® Floor Grinders, Single or Dual-Disc Models
- Magna-Trap® Turbo Grinders, 7”, 9”, 10” Models
- Classic-Style Grinders retrofitted with Magna-Trap® Multi-Tooling Disc
| Name | Part # | Price (USD) | |
|---|---|---|---|
|
Magna-Trap® Dyma-Segs™ Medium (Grey, Pack of 3) | QC2S-MC-0018 | $119.85 |
|
Magna-Trap® Dyma-Segs™ Soft (Yellow, Pack of 3) | QC2S-SC-0018 | $119.85 |
PCD w/Backing Segment - REMOVE
Ideal For:
- Digging through Industrial Strength Coverings, Water-Proofing Membrane, Thick Epoxies and much more
- Leaves a textured concrete surface
- Concrete Surface Profile (CSP) Rating: Varies depending on application
- Tooling Classification: Directional
- Single Disc Grinders (SEC-NG, TL-9, TG-10 & TMC-7) require Left-Hand tooling only.
- Dual Disc Grinders (2EC-NG, 2GC-NG, 2D-HD) require BOTH Left and Right Hand tooling.
For use on:
- Magna-Trap®Floor Grinders, Single or Dual-Disc Models
- Magna-Trap® Turbo Grinders, 7”, 9”, 10” Models
- Classic-Style Grinders retrofitted with Magna-Trap®Multi-Tooling Disc
| Name | Part # | Price (USD) | |
|---|---|---|---|
|
Magna-Trap® Dyma-PCD w/Backing Segment (Left Hand)(Pack of 3) | QC-PCD1-LB | $209.95 |
|
Magna-Trap® Dyma-PCD w/Backing Segment (Right Hand)(Pack of 3) | QC-PCD1-B | $209.95 |